SimSafer Orange 40' Non-Conductive Water Fed Pole
A 32' fiberglass main pole with an included 8' extension for a total working length of 40 feet.
Fiberglass and Kevlar models with electrical testing information
A 32' fiberglass main pole with an included 8' extension for a total working length of 40 feet.
Kevlar-weave 40 foot pole for operators who want the non-conductive build in a lighter, stiffer package.
Thirty-two feet of reach with corrosion, heat and electrical insulation properties built into the layup.
Carbon fiber reach, from 12 feet to 72 feet
Seventy-two feet of Kevlar-wrapped, high modulus carbon fiber for work nothing else reaches.
One pole that works at 12, 20 or 30 feet, so a single purchase covers most of a residential route.
A short, stiff 24 foot pole with an Ultra Hi-Mod carbon core and a protective non-conductive outer layer.
Powered rotating brushes for panels, from the ground
Powered rotating brush head built for photovoltaic glass, run straight off a tank or RO/DI system.
The heavier-duty dual powered head for arrays that have been left too long.
Double-head rotating brush that covers panel runs quickly with very little operator effort.
The entry point into powered solar cleaning, at a weight one person can handle comfortably.
Smaller twin-head unit with both soft and hard bristles, sized for residential rooftop arrays.
Hog hair and nylon heads for glass, frames and panels
Soft but aggressive hog hair that cuts heavy soiling and keeps its shape for years of professional use.
Wide mixed-bristle head that covers large glass and solar panels in fewer passes.
Tapered head that reaches into french panes, awkward corners and the places a flat brush cannot.
Tough hog hair paired with nylon for easier movement, in the two most useful widths.
Add reach, clear gutters, dust high interiors
Adds six feet to most water fed poles, then doubles as a gutter tool and a high level duster.
Nine-foot modular section with insulating properties, for solar, extension and gutter work.
Hi-mod carbon and Kevlar gooseneck built not to crack, split or break where cheaper ones do.
RO/DI carts, hose, goosenecks, clamps and spares
Reverse osmosis and deionization units that strip the minerals out before the water touches the glass.
A ProTool RO/DI cart paired with a SimPole, so a new operation can start with one purchase.
Abrasion-resistant 95A polyurethane hose that stays flexible and resists kinking.
Eight clamps with stainless and aluminium levers, plus bottom plugs. The whole pole, refreshed.
Rust-proof aluminium lever that will not bend or snap under pressure the way plastic does.
A single clamp with lever, screw and spring, for when one section has gone.
Online window cleaning safety training, delivered by Safety Matters NI.